Publications
Publication list
1-“Cu/Matrix Composites Produced with either Coated or Uncoated Reinforcement Powders”, S. F.
Moustafa, W.M. Rashad Daoush and E.E. El- Shereafy, Canadian Metallurgical Quaterly, Vol. 40,
No., 4, pp. 533 (2001).
2- “ Processing of Ni/Al intermetallic and its composites using coating route”, S.F.Moustafa, Z.
Abdel-Hamid, S.S Abdel Rehim, W.M. Rashad Daoush, Powder Metallurgy World Congress &
Exhibition, PM 2004, Vienna, Austria, 17-21 Oct. ( 2004).
3-“Colored Rubber Vulcanizates with Some Magnetic Properties” S.H. El-Sabbagh, N.M. Ahmed
and W.M.Daoush; Journal of Applied Polymer Science, Vol. 102, pp. 494 (2006).
4-“Processing of Metallic Filters by Powder Metallurgy Technique; W.M.Daoush and S.F. Moustafa,
Journal of Powder Metallurgy Progress, Vol.6, No.4, pp. 164 (2006).
5-"Synthesis and Magnetic Characteristics of Crystallized Ceramic in the BaO–NiO-TiO2–Fe2O3
System,” A. Francis and W.M. Daoush; journal of Materials Processing Technology Vol. 181,
pp.213 (2007).
6-“Studies on Magnetic Pigmented Polyester Composites”., S.H. Mansour, N.M.Ahemed and
W.M.Daoush, Polymer-Plastics Technology and Engineering, Vol. 46, pp. 85 (2007).
7-"Synthesis of Nanosized Fe-Ni Powder by Chemical Process for Magnetic Applications,” S.F.
Moustafa and W.M.Daoush, journal of Materials Processing Technology Vol. 181, pp.59 (2007).
8- “Solid-State Reaction in Al-Fe Binary System Induced by Mechanical Alloying” S.H. Kaytbay
S.F. Moustafa and W.M. Daoush Journal of Defect and Diffusion, vol.272, pp. 15 (2007).
9-“Coating points a way for synthesis of tough intermetallics” W.M. Daoush, and S.F. Moustafa,
Metal Powder Report, Vol 62, No. 1, pp. 30 (2007).
10-"Processing of FeCo Nanosized Soft-Magnetic Material by Powder metallurgy Technique"
W.M.Daoush; Mater. Sci .Forum, Vols., 558-559, pp. 707 (2007).
11-"Effect of Metallic Binder Composition on Microstructure and Hardness of (W,Ti)C Cemented
Carbides" Walid M. Daoush, Kyong H. Lee, Hee S. Park, Soon H. Hong, J. of Korean Powder
Metallurgy Institute, Vol.14, pp.208 (2007).
12-"Synthesis and Consolidation of Nano-Sized NiCo Powder by Powder Technology Rout"
W.M.Daoush; Mater. Sci .Forum, Vols., 561-565, pp. 1425 (2007) .
13-“Beating the force field with PM shield materials,” W. M. Daoush and O.A. Elkady; Metal Powder
Report, Vol 62, No 8, pp. 22(2007).
14- “Phase Identification and Magnetic Properties of Nanocrystalline Fe50Cu50” S. H. Kaytbay and
W.M. Daoush, Journal of Powder Metallurgy Progress, Vol.7, No.2, pp. 111 (2007).
15- "Processing and Characterizations of CNT/Cu Sintered Materials" W. M. Daoush, The 1st
International Conference in Advanced Materials and Nanotechnology, NRC, Cairo, Egypt 3-5 Dec.
(2007).
16-“Study of Some co-Precipitated Manganite Peroveskite Samples Doped Iron” A.G. Mostafa, E.K.
Abdel-Khalek, W.M. Daoush, S.F. Moustfa, Journal of Magnetism and Magnetic Materials, Vol.
320, No.24, pp 3356 ( 2008).
17-"Processing and Characterization of CNT/Cu Nanocomposites by Powder Technology"
W.M.Daoush, Journal of Powder Metallurgy and Metal Ceramics, Vol. 47, Nos. 9-10, pp
531(2008).
18-"Structural, Magnetic and Electrical Transport Properties of the La0.70Sr0.30Mn0.9657Fe0.04O3+δ
Perovskite" A.G. Mostafa, E.K. Abdel-Khalek, W.M. Daoush, M.Y.Hassaan Journal Hyperfine
Interaction, vol. 184, pp. 167( 2008).
19- "Coated powders 'a good base' for intermetallics", Walid M.Daoush, Sayed F. Moustafa ; Metal
Powder Report, Vol 63, No 11, pp. 16 (2008).
20-“Effect of Liquid Phase Composition on the Microstructure and Properties of (W, Ti) C
Cemented Carbide Cutting Tools “ Walid M. Daoush, Kyong H. Lee, Hee S. Park and Soon H.
Hong Inter. J. of Ref. Met. and Hard Mat., vol. 27, No.1, pp. 83( 2009).
21-" Effect of Binder Compositions on Microstructure, Hardness and Magnetic Properties of
(Ta,Nb)C-Co and (Ta,Nb)C-Ni Cemented Carbides, Walid M. Daoush, Hee S. Park, Kyong H.
Lee, Soon H. Hong Inter. J. of Ref. Met. and Hard Mat., vol.27, pp.669 (2009).
22-"Electrical and Mechanical Properties of Carbon Nanotube Reinforced Copper Nanocomposites
Fabricated by Electroless Deposition Process" W.M.Daoush, B.K.Lim, C.B.Mo, D.H.Nam, S. H. Hong
Journal of Materials Science & Engineering A, vol. 213-214 pp.247(2009).
23- "Utilization of the Hyperfine Structure of the Doped Iron Nuclei to Elucidate the Structural,
Electric and Magnetic Properties of La1-xCaxMn0.95Fe0.05O3 Perovskite System" H.A.Sallam,
W.M.El-Meligy, E.A.Mohamed, W.M.Daoush, A.G.Moustafa, Arab Journal of Nuclear Science and
Applications, Vol. 43, No 1, 2010.
24-"Influence of Powder Preparation on Consolidation Behavior and Properties of Tungsten-Copper
Alloys" Wei Li, Walid M. Daoush, Aditya Bothate, Z. Abdel-Hamid, Ridvan Yamanoglu, Eugene
Olevsky, Sayed Moustafa, Randall M. German., Advances in Powder Metallurgy& Particulate
Materials 2, pp 45, 2010.
25- "Synthesis and Characterizations of Nanosized Fe3O4 for Biomedical Applications", Walid M. Daoush,
World Journal of Engineering Vol.2, pp. 161 (2010).
26- "Advances in W-Cu: New Powder Systems" Randall M. German, Aditya Bothate, Wei Li, Eugene A.
Olevsky, Walid M. Daoush, Sayed F. Moustafa, International Conference on Tungsten, Refractory
& Hardmaterials, San Francisco, USA, 19 -21 May (2011).
27- "Two Stages Spark Plasma Sintering (TSSPS) of W-Cu Alloys" Wei Li, Aditya Bothate, Eugene A.
Olevsky, Randall M. German, Walid M. Daoush, Sayed F. Moustafa International Conference on
Tungsten, Refractory & Hardmaterials, San Francisco, USA, 19 -21 May (2011).
9- Conferences and Workshops
1- Us-Egypt Workshop on Advances in Science and Technology of Treatment and Utilization of
Industrial Wastes, at Jun 6-10, 2004, Cairo Egypt.
2- Powder Metallurgy Conference, Oct.17-21, 2004, Vienna, Austria.
3- 4th Japanese-Mediterranean Workshop on Applied Electromagnetic Engineering for Magnetic,
Superconducting and Nano materials, at 17-20 Sept., 2005, Cairo., Egypt.
4- International Conference on the Applications of the Moussbauer Effect (ICAME 2005) 13-16
Sept., 2005, Montpellier, France.
5-The US-Egypt Workshop on Synthesis, Characterizations and Industrial Applications of
Nanoparticles and Nanostructure Materials, at 12-15 Nov. 2005, Mubarak City, Alexandria,
Egypt.
6- Powder Metallurgy Congress and Exhibition, (24-28 Sept. 2006) Busan, Korea.
7-First Afro-Asian Conference on Advanced Materials Science and Technology (AMSAT06),
Nov.13-16, 2006, Cairo, Egypt.
8- 1st Workshop of the Advanced Materials & Applied Nanotechnology Group,
AMANTG (26-27, Nov, 2006), NRC, Cairo, Egypt.
9-Nanotech Insight 2007,at 10-17 March 2007, Luxor, Egypt.
10- SAMPE 2007, Cincinnati, OH, USA (29 Oct.-1 Nov. 2007).
11- 3rd international conference on Recrystallization and Grain Growth (10-15, Jun, 2007), Jeju
Island, Korea”.
12- The sixth Korea-Japan Joint Symposium on Composite Materials, 1-2Nov. (2007), POSTEC,
Korea.
13- The International Conference on Molecular Nano-Photochemistry, Cairo, Egypt, 24-28
Feb.2008.
14- Spring Symposium of Korea Powder Metallurgy Institute, Chunbuck Univ., April 10-11, 2008.
15- 2008 Full conference of Korea Powder Metallurgy Institute, Nov. 13-14, 2008.
16- First International Pharmaceutical Sciences Conference, Tanta Univ., Egypt, Nov. 18-19, 2009.
17- Powder Met 2010, Metal Powder Industries Federation, Fort Lauderdale, Florida, June 30,2010.
18- ICCE-18 International Conference of Composite and nanomaterials, Anchorage, Alaska, USA,
July 4-10, 2010.
19-International Conference on Materials Imperatives in the New Millennium [MINM2010] Cairo,
Egypt, 29Nov.-2Dec.2010.
Books
Chapter entitled “Improvement of the Reinforcements Distribution in the Composite Matrices Using Powder Coating Process”, authored by Walid M. Daoush, Byung K. Lim, Hee S. Park, Sayed F. Moustafa, and Soon H. Hong. included in the book entitles “High Performance Coatings for Automotive and Aerospace Industries” was available online at the Nova Science Publisher, New York, https://www.novapublishers.com/catalog/product_info.php?products_id=11740
Patents:
1- "High Hardness Coating Powder, And Preparation Method Thereof ", Park Hee Sub, Ryoo Min Ho, Daoush Walid M., Hong Soon Hyung, Patent No. WO2010056077, May 2010.
