Publications
1.Tsai, J. J., Bau, I. J., Chen, H. T., Lin, Y. T., and Wang, G. J.* “A novel nanostructured biosensor for the detection of the dust mite antigen Der p2,” Inter. J. Nanomedicine, Vol. 6, pp 1-8. (2011) (SCI, Impact Factor=2.612)
2.Chang, C. Y. and Wang, G. J.*, “Anodic Aluminum Oxide Diodes,“ Japanese Journal of Applied Physics, accepted (2011) (SCI, Impact Factor=1.138)
3.Lai, M. H., Lee, M. W.*, Wang, G. J., Tai, M. F., “Photovoltaic performance of new-structure ZnO-nanorod dye-Sensitized solar cells,“ Inter. J. Electrochemical Science, Vol. 6, pp. 2122- 2130. (2011) (SCI, Impact Factor=2.175)
4.Tubtimtae, A., Lee, M. W.*, and Wang, G. J., “Ag2Se quantum-dot sensitized solar cells for full solar spectrum light harvesting,“ Journal of Power Sources, Vol. 196, pp. 6603-6608. (2011) (SCI, Impact Factor=3.792)
5.Lin, Y. H., Chang, K. J., and Wang, G. J.*, “A Novel Chip-on-Glass method for Slim LCD Packaging,“ Microsystem Technologies, Vol. 17, pp. 685-691. (2011) (SCI, Impact Factor=1.025)
6.Wang, G. J.*, Lee, M. W., Chen, W. Z., Chen, Y. H., Chien, M. C., Yu, M. C.,”A Metal-Solution Field-Effect-Transistor Enhanced Proton-Motive-Force Driving Photovoltaic,” IEEE Trans. on Nanotechnology, Vol. 10, pp. 191-196. Cover page (2011) (SCI, Impact Factor=1.671)
7.Wang, C. G. and Wang, G. J.*, “A MOSFET-like infrared sensor for the enhancement of photoconductivity and photoresponsivity,” Current Nanoscience, Vol. 6, No. 6, 648-653. (2010) (SCI, Impact Factor=1.472)
8.Wang, G. J.*, Lin, Y. C., and Hsu, S. h., “The Fabrication of PLGA Microvessel Scaffolds with Nano-Patterned Inner Walls,” Biomedical Microdevices, Vol. 12, pp. 841-848. (2010). (SCI, Impact Factor=3.323).
9.Wang, G. J.* and Chou, S. W., “Electrophoretic deposition of uniformly distributed TiO2 nanoparticles using an anodic aluminum oxide template for efficient photolysis,” Nanotechnology, 21, 115206, (2010) (SCI, Impact Factor=3.137).
10.Hsu, C. W., Chou, Z. D., and Wang, G. J.*, “Fabrication of High Aspect Ratio Alumina-Nickel Coaxial Nanorod Array by Electrodeposition,“ ASME/IEEE J. of Microelectromechnaical System, Vol. 19, No. 4, pp. 849-853 (2010). (SCI, Impact Factor=1.922).
11.Chen, Y. C., Chen, G. Y., Lin, Y. C., and Wang, G. J.*, “A Lab-on-a-Chip Capillary Network for Red Blood Cell Hydrodynamics,” Microfluidics and Nnaofluidics, Vol. 9, pp 585-591. (2010) (SCI, Impact Factor=3.286).
12.Chen, G. Y., Lee, M. W., and Wang, G. J.*, “ Fabrication of Dye- Sensitized Solar Cells with A 3D Nanostructured Electrode,“ Inter. J. of Photoenergy, Vol. 2010, Article ID 585621, 7 pages, DOI:10.1155/2010/585621, (2010) (SCI, Impact Factor=1.494)
13.Lai, M. H., Tubtimtae, A., Lee, M. W.*, Wang, G. J., “ZnO-Nanorod Dye-Sensitized Solar Cells: New Structure without a Transparent Conducting Oxide Layer,” Inter. J. of Photoenergy, Vol. 2010, Article ID 497095, 5 pages, (DOI: 10.1155/2010/497095), (2010) (SCI, Impact Factor=1.494)
14.Tubtimtae, A., Wu, K. L., Tung, H. Y., Lee, M. W.*, Wang, G. J., “Ag2S quantum dot-sensitized solar cells,” Electrochemistry Communications, Vol. 12, pp. 1158-1160 (2010) (SCI, Impact Factor=4.243)
15.Wang, G. J.*, Lin, Y. C., Lee, J. W,, Hsueh, C. C., Hsu, S. h, Hung, H. S., “Fabrication of Orderly Nanostructured PLGA Scaffolds Using Anodic Aluminum Oxide Templates,” Biomedical Microdevices, Vol. 11, pp. 843-850. (2009) (SCI, Impact Factor=3.323)
16.Chen, H. T. and Wang, G. J.*, “Fabrication of 3D Nano-structured ITO Films by RF Magnetron Sputtering,” Current Nanoscience, Vol. 5, No. 3, pp. 297-301. (2009) (SCI, Impact Factor=1.472)
17.Wang, G. J.*, Lee, M. W., Chen, Y. H., “A TiO2/CNT coaxial structure and standing CNT array laminated photocatalyst to enhance the photolysis efficiency of TiO2,” Photochemistry and Photobiology, Vol. 84, pp. 1493-1499. (2008) (SCI, Impact Factor=2.253)
18.Chien, M. C., Wang, G. J.*, Yu. M. C., “Nanopore Size Estimation Using Electrochemical Impedance Spectroscopy Analysis,” Japanese Journal of Applied Physics, Vol. 47, No. 9, pp. 7459-7463. (2008) (SCI, Impact Factor=1.138)
19.Wang, G. J.*, Chen, H. T., Yang, H., “Fabrication of crystalline indium tin oxide nanobaskets electrode using AAO template”, Japanese Journal of Applied Physics, Vol. 47, No. 7, pp. 5727-5729. (2008) (SCI, Impact Factor=1.138)
20.Wang, G. J.*, Ho, K. H., Hsueh, C. C., “Biodegradable polylactic acid (PLA) microstructures for scaffold applications,” Microsystem Technologies, Vol. 14, pp. 989-993. (2008) (SCI, Impact Factor=1.025)
21.Wang, G. J.*, Chen, W. Z., Chang, K., “A two-step etching method to fabricate nanopores in silicon,” Microsystem Technologies, Vol. 14, pp. 925-927. (2008) (SCI, Impact Factor=1.025)
22.Wang, G. J.*, Hsueh, C. C., Hsu, S. H., Hung, H. S., “Fabrication of PLGA Microvessel Scaffolds with Circular Microchannels Using Soft Lithography,” Journal of Micromechanics and Microengineering, Vol. 17, pp. 2000-2005. (2007) (SCI, Impact Factor=1.997)
23.Chien, M. C., Wang, G. J.*, Yu. W. C., “Modeling Ion Diffusion Current in a Nanochannel Using Infinitesimal Distribution RC Circuits,” Japanese Journal of Applied Physics, Vol. 46, No. 11, pp. 7436-7440. (2007) (SCI, Impact Factor=1.138)
24.Wang, G. J.*, Ho, K. H., Hsu, S. H., Wang, K. P., “Microvessel Scaffold with Circular Microchannels by Photoresist Melting,” Biomedical Microdevices, Vol. 9, pp. 657-663. (2007) (SCI, Impact Factor=3.323)
25.Wang, G. J.*, Lin, Y. C., Lin, G. S., “Ultra Fine Pitch Flat Panel Display Packaging Using 3m Conductive Particles,” Microsystem Technologies, Vol. 13, No. 11-12. pp. 1471-1476. (2007) (SCI, Impact Factor=1.025)
26.Fan, J. Y., Chien, M. C, Wang, G. J.*, “Experimental Investigation on the Bi-directional Growing Mechanism of the Foils Laminate Approach in AAO Fabrication,” Nanoscale Research Letters, Vol. 2, No. 1, pp. 49-53. (2007) (SCI, Impact Factor=2.894)
27.Wang, G. J.*, Lin, Y. C., Lin, G. S., “A Novel Contact Resistance Model of Anisotropic Conductive Film for FPD Packaging,” Microsystem Technologies, Vol. 13, No. 11-12. pp. 1477-1482. (2007) (SCI, Impact Factor=1.025)
28.Wang, G. J.*, Lin, B. S. and Chang, K., “In-Situ Neural Network Process Controller for Copper Chemical Mechanical Polishing,” International Journal of Advanced Manufacturing Technology, Vol. 32, pp. 42-54. (2007) (SCI, Impact Factor=1.128)
29.Wang, G. J.*, Chang, J. H., and Yang H., “Triplex-Pumping CD-Like Microfluidic Platform with Parabolic Microchannels,” Microsystem Technologies, Vol. 12, No. 10-11. pp. 899-905. (2006) (SCI, Impact Factor=1.025)
30.Yu, W. C. and Wang, G. J.*, “Discrete Sliding Mode Controller Design Based on the LQR Suboptimal Approach with Application on AC Servo Motor,” Journal of Chinese Institute of Engineers, Vol. 29, No 5, pp. 873-882. (2006) (SCI, Impact Factor=0.219)
31.Wang, G. J.* and Hsu, W. H., “PET Laminated Thin-Film Capillary Electrophoresis Chips by Sandwiching Method,” International Journal of Advanced Manufacturing Technology, Vol. 30, No 1-2, pp. 87-91. (2006) (SCI, Impact Factor=1.128)
32.Chen, S. N., Wang, G. J.* and M. C. Chien, “Analytical modeling of piezoelectric vibration-induced micro power generator, “Mechatronics, Vol. 16, pp 379-387. (2006) (SCI, Impact Factor=1.198)
33.Wang, G. J.*, Yu, W. C., Lin, Y. H., Yang, H., “Modeling and Fabrication of a Piezoelectric Vibration-Induced Micro Power Generator,” Journal of Chinese Institute of Engineers, Vol. 29, No. 4. pp. 697-706. (2006) (SCI, Impact Factor=0.219)
34.Wang, G. J.* and Liu, H. R., “Piezoelectric Actuated Multiple Channels Optical Switch,” Analog integrated circuits and signal processing, Vol. 48, No. 1, pp15-20. (2006) (SCI, Impact Factor=0.408)
35.Wang, G. J.* and Peng, C. S., “Control Porous Pattern of Anodic Aluminum Oxide by Foils Laminate Approach,” Journal of Nanoscience and Nanotechnology, Vol. 6, No. 4, pp 1004-1008. (2006) (SCI, Impact Factor=1.435)
36.Wang, G. J.* and Yu, C. H., “Developing a Neural Network Based Run-To-Run Process Controller For Chemical Mechanical Planarization,” International Journal of Advanced Manufacturing Technology, Vol. 28, No. 9, pp 899-908. (2006) (SCI, Impact Factor=1.128)
37.Wang, G. J.* and Hsu, Y. F., “Structure Optimization of Microvascular Scaffolds” Biomedical Microdevices, Vol. 8, No. 1, pp 51-58. (2006) (SCI, Impact Factor=3.323)
38.Wang, G. J.*, Hsu, Y. F., Hsu, S. H., Horng, R. H. “JSR Photolithography Based Microvascular Fabrication and Cell Seeding” Biomedical Microdevices, Vol. 8, No. 1, pp 17-23. (2006) (SCI, Impact Factor=3.323)
39.Chang, Y. Z., Yang, M. W., Wang, G. J.*, “A New Mass Spectrometry Electro-Spray Tip Based on Precise Mechanical Micro Machining,” Analytical and Bioanalytical Chemistry, Vol. 383, No. 1, pp. 76-82. (2005) (SCI, Impact Factor=3.480)
40.Wang, G. J.*, Chen, C. L., Hsu, S. H., and Chiang, Y. L., “Bio-MEMS Fabricated Artificial Vascular Network for Tissue Engineering,” Microsystem Technologies, Vol. 12, No. 1-2, pp. 120-127. (2005) (SCI, Impact Factor=1.025)
41.Wang, G. J.* and Chou, M. H., “A Neural-Taguchi Based Quasi Time-Optimal Control Strategy For Chemical Mechanical Polishing Processes,” International Journal of Advanced Manufacturing Technology, Vol. 26, No. 7-8, pp. 759-765. (2005) (SCI, Impact Factor=1.128)
42.Wang, G. J.*, Cheng, Y. D, Chang, K.,” A New Neural Fuzzy Control System with Heuristic Learning,” International Journal of Fuzzy Systems, Vol. 7, No. 4, pp. 158-168. (2005) (SCI, Impact Factor=1.09)
