Publications
List of publications in peer-reviewed journals (2006-2011)
1. K. Chrissafis, K.M. Paraskevopoulos and D. N. Bikiaris, Thermal degradation kinetics of a new biodegradable aliphatic polyester, poly(propylene succinate), Polymer Degradation and Stability, 91 (2006) 60
2. Th. Kehagias, Ph. Komninou, P. Kavouras, K. Chrissafis, G. Nouet, Th. Karakostas, Crystal phase separation and microstructure of a thermally treated vitrified solid waste, J. European Ceramic Society, 26 (2006) 1141
3. N. Pistofidis, G. Vourlias, D. Chaliampalias, K. Chrysafis, G. Stergioudis, E.K. Polychroniadis, On the mechanism of formation of zinc pack coatings, J. of Alloys and Compounds, 407 (2006) 221
4. N. Pistofidis, G. Vourlias, E. Paulidou, K. Chrissafis, G. Stergioudis, E.K. Polychroniadis, D. Tsipas, A combined characterization of zinc hot-dip galvanized wires with DSC, XRD and SEM, J. Therm. Anal. Cal., 86 (2006) 417
5. K.Chrissafis, M. Ozer, E. Vinga, E. Polychroniadis, X. Chatzistavrou, K.M. Paraskevopoulos, Characterization and phase transformation study in TlSbSe2 crystals, J. Therm. Anal. Cal., 86 (2006) 839
6. X. Chatzistavrou, K. Chrissafis, E. Polychroniadis, E. Kontonasaki, P. Koidis, K.M. Paraskevopoulos, Inducing bioactivity in dental porcelain through Bioglass: Changes in thermal behaviour, J. Therm. Anal. Cal., 86 (2006) 255
7. K. Chrissafis, K.M. Paraskevopoulos and D. N. Bikiaris, Effect of molecular weight on thermal degradation mechanism of the biodegradable polyester, poly(ethylene succinate), Thermochim. Acta, 440 (2006) 166
8. P. Kavouras, Th. Kehagias, K. Chrissafis, S. Kokkou, Ph. Komninou, Th. Karakostas, The role of alkali content in the devitrification mechanisms of SiO2-Fe2O3-Na2O-PbO system, J. Therm. Anal. Cal., 86 (2006) 715
9. M. Anastasiou, Th. Hasapis, T. Zorba, E. Pavlidou, K. Chrissafis, K.M. Paraskevopoulos, TG-DTA and FTIR analyses of plasters from Byzantine Monuments in Balkan region: Comparative study, J. Therm. Anal. Cal., 84 (2006) 27
10. G. Alexandrou, K. Chrissafis, L. Vasiliadis1 E. Pavlidou, E.K. Polychroniadis, EEffect of heat sterilization on surface characteristics and microstructure of Mani NRT rotary Nickel- Titanium instruments, Int. Endon. J., 39 (2006) 770
11. K. Chrissafis, K.M. Paraskevopoulos, C. Manolikas, Studying Cu2-xSe Phase Transformation through DSC Examination, J. Therm. Anal. Cal., 84 (2006) 195
12. C. Sikalidis, T. Zorba, K. Chrissafis, K.M. Paraskevopoulos, Iron oxide pigmenting powders produced by thermal treatment of iron solid wastes from steel mill pickling lines, J. Therm. Anal. Cal., 86 (2006) 411
13. X. Chatzistavrou, E. Kontonasaki, K. Chrissafis, T. Zorba, P. Koidis, K.M. Paraskevopoulos, Surface and bulk contributions in the crystallization process of a bioactive glass, Key Engin. Mat., 309-311 (2006) 313
14. X. Chatzistavrou, E. Kontonasaki, K. Chrissafis, T. Zorba, P. Koidis, K.M. Paraskevopoulos, Sintered Hydroxyapatite/Bioactive glass composites: Thermal Analysis and Bioactivity, Key Engin. Mat., 309-311 (2006) 167
15. N. Pistofidis, G. Vourlias, D. Chaliampalias, K. Chrissafis, G. Stergioudis, E.K. Polychroniadis, DSC study of the deposition reaction of zinc pack coatings up to 550oC, J. Therm. Anal. Cal., 84 (2006) 191
16. G. Alexandrou, K. Chrissafis, L. Vasiliadis, E. Pavlidou, E.K. Polychroniadis, SEM observations and Differential Scanning Calorimetric studies of new and sterilized Nickel- Titanium rotary endodontic instruments, J. Endodon., 32 (2006) 675
17. M. Kantiranis, C. Chrissafis, A. Fillipidis, K.M. Paraskevopoulos, Thermal distinction of HEU-type mineral phases contained in Greek zeolite-rich volcaniclastic tuffs, European J. Mineralogy, 18 (2006) 509
18. M. Manos, K. Chrissafis and M.G. Kanatzidis, Unique pore selectivity fop Cs+ and exceptionally high NH4+ exchange capacity of the chalcogenide material K6Sn[Zn4Sn4S17], JACS, 128 (2006) 8875
19. X. Chatzistavrou, T. Zorba, K. Chrissafis, G. Kaimakamis, E. Kontonasaki, P. Koidis, K.M. Paraskevopoulos, Influence of particle size on the crystallization process and the bioactive behaviour of a bioactive glass system, J. Therm. Anal. Cal., 85 (2006) 253
20. P. Kavouras, T. Kehagias, I. Tsilika, G. Kaimakamis, K. Chrissafis, D. Papadopoulos, Th. Karakostas, Glass-ceramic materials from electric arc furnace dust, J. Hazardous Materials, A139 (2007) 424
21. K. Chrissafis, Multicyclic study of the carbonation of CaO using different limestones, J. Therm. Anal. Cal., 89 (2007) 525
22. A. Samoladas, A. Jannakoudakis, D. N. Bikiaris, K. Chrissafis, and K.M. Paraskevopoulos, Effect of end group content on photochromic behaviour of spiropyran in polycaprolactone-poly(ethylene succinate) blends, J. Appl. Polymer Science, 105 (2007) 3623
23. P. Kavouras, Th.A. Ioannidis, G. Kaimakamis, I. Tsilika, K. Chrissafis, Th. Kehagias, A. Zouboulis, Th. Karakostas, EAFD-loaded vitreous and glass-ceramic materials, J. Eur. Ceramic Soc., 27 (2007) 2317
24. G. Vourlias, N. Pistofidis, D. Chaliampalias, K. Chrissafis, El. Pavlidou, G. Stergioudis, Resistance of zinc thermal sprayed coatings on different corrosive environments, J. Therm. Anal. Cal., 87 (2007) 409
25. J.B. Wachter, K. Chrissafis, V. Petkov, C.D. Maliakas, D. Bilc, Th. Kyratsi, K.M. Paraskevopoulos, S.D. Mahanti, T. Torbrugge, H. Eckert and M.G. Kanatzidis, Local structure and influence of bonding on the phase-change behaviour of the chalcogenide compounds K1-xRbxSb5S8, J. Solid State Chem., 180 (2007) 425
26. K. Chrissafis, G. Antoniadis, K.M. Paraskevopoulos, A. Vassiliou and D. N. Bikiaris, Comparative study of the effect of different nanoparticles on the mechanical properties and thermal degradation mechanism of in situ prepared poly(ε-caprolactone) nanocomposites, Composites Science and Technology, 67 (2007) 2165
27. T. Zorba, K. Chrissafis, K.M. Paraskevopoulos and D. N. Bikiaris, Synthesis, characterization and thermal degradation mechanism of three poly(alkylene adipate)s: Comparative study, Polym. Degrad. Stab., 92 (2007) 222
28. D. N. Bikiaris, K. Chrissafis, K.M. Paraskevopoulos, K.S. Triantafyllidis, E.V. Antonakou, Investigation of thermal degradation mechanism of an aliphatic polyester using pyrolysis-gas chromatography-mass spectrometry and a kinetic study of the effect of the amount of polymerisation catalyst, Polym. Degrad. Stab., 92 (2007) 525
29. S. Papadimitriou, D. N. Bikiaris, K. Chrissafis, K.M. Paraskevopoulos and S. Mourtas, Synthesis, characterization and thermal degradation mechanism of fast biodegradable PPSu/PCL copolymers, J. Polym. Sci. Part A: Polym. Chem., 45 (2007) 5076
30. K. Chrissafis, K.M. Paraskevopoulos, S.Y. Stavrev, A. Docoslis, A. Vassiliou and D.N. Bikiaris, Characterization and thermal degradation mechanism of isotactic polypropylene/carbon black nanocomposites, Thermochim. Acta, 465 (2007) 6
31. G. Vourlias, N. Pistofidis, K. Chrissafis, G. Stergioudis, Zinc coatings for oxidation protection of ferrous substrates. Part I: Macroscopic examination of the coating oxidation, J. Therm. Anal. Calorim., 90 (2007) 769
32. G. Vourlias, N. Pistofidis, K. Chrissafis, Zinc coatings for oxidation protection of ferrous substrates. Part II: Microscopic examination of the coating oxidation-Study of the oxidation mechanism, J. Therm. Anal. Calorim., 90 (2007) 777
33. A. Vassiliou, D. Bikiaris, K. Chrissafis, K.M. Paraskevopoulos, S.Y. Stavrev and A. Docoslis, Nanocomposites of isotactic polypropylene with carbon nanoparticles exhibiting enhanced stiffness, thermal stability and gas barrier properties, Composites Science and Technology, 68 (2008) 933
34. G. Vourlias, N. Pistofidis, K. Chrissafis, El. Pavlidou, G. Stergioudis, Mechanism and kinetics of the formation of zinc pack coatings, J. Therm. Anal. Calorim., 91 (2008) 497
35. P. Kavouras, Th. Kehagias, Ph. Komninou, K. Chrissafis, C. Charitides and Th. Karakostas, Interface controlled active fracture modes in glass-ceramics, J. Mater. Sci., 43 (2008) 3954
36. T. Zorba, E. Papadopoulou, A. Hatjiisaak, K.M. Paraskevopoulos, K. Chrissafis, Urea-Formaldehyde resins characterized by Thermal analysis and FTIR method, J. Therm. Anal. Calorim., 92 (2008) 29
37. D. Bikiaris, A. Vassiliou, K. Chrissafis, K.M. Paraskevopoulos, A. Jannakoudakis, A. Docoslis, Effect of acid treated multi-walled carbon nanotubes on the mechanical, permeability, thermal properties and thermo-oxidative stability of isotactic polypropylene, Polym. Degrad. Stab., 93 (2008) 952
38. A. Kaidatzis, J.B. Wachter, K. Chrissafis, K.M. Paraskevopoulos and M.G. Kanatzidis, Crystal/glass phase change in K1-xRbxSb5S8 (x=0.25, 0.50, 0.75) studied through thermal analysis techniques, J. Non Cry. Solids, 354 (2008) 3643
39. Eleana Kontonasaki, Nikolaos Kantiranis, Lambrini Papadopoulou, Xanthippi Chatzistavrou, Triantafillia Zorba, Afroditi Siivropoulou, Konstantinos Chrissafis, Konstantinos M. Paraskevopoulos and Petros T. Koidis, Microstructural characterization and comparative evaluation of physical, mechanical and biological properties of three ceramics for metal-ceramic restorations, Dental mater., 24 (2008) 1362
40. S.S. Makridis, I. Panagiotopoulos, I. Tsiaoussis, N. Frangis, E. Pavlidou, K. Chrisafis, G.F. Papathanasiou, K. Efthimiadis, G.C. Hadjipanayis, D. Niarchos, Structural, microstructural and magnetic properties of nanocomposite isotropic Sm(CobalFe0.1MyZr0.04B0.04)7.5 ribbons with M=Ni, Cu, and y=0.09 and 0.12, J. Magn. Magn. Mater., 320 (2008) 2322
41. K. Chrissafis, K.M. Paraskevopoulos, G.Z. Papageorgiou and D.Ν. Bikiaris, Thermal and dynamic mechanical behavior of bionanocomposites: Fumed silica nanoparticles dispersed in poly(vinyl pyrrolidone), chitosan and poly(vinyl alcohol), J. Appl. Polym. Sci., 110 (2008) 1738
42. G. Vourlias, N. Pistofidis, K. Chrissafis, High – temperature oxidation of precipitation hardening steel, Thermochimica Acta, 478 (2008) 28
43. D. Chaliampalias, G. Vourlias, E. Pavlidou, G. Stergioudis, S. Skolianos, K. Chrissafis, High temperature oxidation and corrosion in marine environments of thermal spray deposited coatings, Applied surface Science, 255 (2008) 3104
44. A. Kazakopoulos, Ch. Sarafidis, K. Chrissafis, O. Kalogirou, Synthesis and characterization of inverse spinel LiNiVO4 and LiCoVO4 with impedance Spectroscopy, Solid State Ionics, 179 (2008) 1980
45. D. Chaliampalias, G. Vourlias, E. Pavlidou, S. Skolianos, K. Chrissafis, G. Stergioudis, Comparative examination of the microstructure and high temperature oxidation performance of NiCrBSi flame sprayed and pack cementation coatings, Applied surface Science, 255 (2009) 3605
46. G. Vourlias, N. Pistofidis, E. Pavlidou, K. Chrissafis, Oxidation behaviour of precipitation hardened steel. TG, X-ray, XRD and SEM study, J. Therm. Anal. Calorim., 95 (2009) 63
47. K. Chrissafis, Kinetics of thermal degradation of polymers: Complementary use of isoconversional and model-fitting methods, J. Therm. Anal. Calorim., 95 (2009) 273
48. Th. Kyratsi, E. Kika, E. Hatzikraniotis, K.M. Paraskevopoulos, K. Chrissafis and M.G. Kanatzidis, Synthetic conditions and their doping effect on β-K2Bi8Se13, J. Alloys Compd., 474 (2009) 351
49. K. Chrissafis, K.M. Paraskevopoulos, E. Pavlidou and D.Ν. Bikiaris, Thermal degradation mechanism of HDPE nanocomposites containing fumed silica nanoparticles, Thermochim. Acta, 485 (2009) 65
50. D. Chaliampalias, G. Vourlias, E. Pavlidou, G. Stergioudis, K. Chrissafis, Examination of the oxidation resistance of high alloyed tool steels at elevated temperatures, Applied Surface Sci., 255 (2009) 6244
51. G. Antoniadis, K.M. Paraskevopoulos, D. Bikiaris, K. Chrissafis, Melt-crystallization mechanism of Poly(ethylene terephthalate)/multi-walled carbon nanotubes (PET/MWCNTs) prepared by in- situ polymerization, J. Polymer Science Part B: Polymer Physics, 47 (2009) 1452
52. E. Chatzistavrou, X. Chatzistavrou, L. Papadopoulou, N. Kantiranis, K. Chrissafis, A.R. Boccaccini and K.M. Paraskevopoulos, Sol-gel hydroxypatite-Cao composites: Fabrication and Bioactivity Studies, Key Engin. Mat., 396-398 (2009) 99
53. O.M. Goudouri, X. Chatzistavrou, E. Kontonasaki, N. Kantiranis, L. Papadopoulou, K. Chrissafis, K.M. Paraskevopoulos, Study of the Bioactive Behavior of Thermally Treated modified 58S Bioactive Glass, Key Engin. Mat., 396-398 (2009) 131
54. X. Chatzistavrou, E. Chatzistavrou, N. Kantiranis, L. Papadopoulou, E. Kontonasaki, K. Chrissafis, P. Koidis, K.M. Paraskevopoulos and A.R. Boccaccini, Novel glass-ceramics for dental application by sol gel technique, Key Engin. Mat., 396-398 (2009) 153
55. G. Antoniadis, K.M. Paraskevopoulos, D. Bikiaris, K. Chrissafis, Kinetics study of cold-crystallization of poly(ethylene terephthalate) nanocomposites with multi-walled carbon nanotubes, Thermochim. Acta, 493 (2009) 68
56. K. Chrissafis, K.M. Paraskevopoulos, I. Tsiaoussis, D. Bikiaris, Comparative study of the effect of different nanoparticles on the mechanical properties, permeability and thermal degradation mechanism of HDPE, J. Appl. Pol Sci., 114 (2009) 1606
57. G. Vourlias, N. Pistofidis, P. Psyllaki, E. Pavlidou, K. Chrissafis, Nano-phenomena during exposure of plasma-sprayed ceria stabilised zirconia coatings to oxygen rich environments, J. Alloys Compd., 483 (2009) 378
58. G. Vourlias, N. Pistofidis, P. Psyllaki, E. Pavlidou, K. Chrissafis, Plasma-Sprayed YSZ coatings: Microstructural features and resistance to molten metals, J. Alloys Compd., 483 (2009) 382
59. A. Vassiliou, K. Chrissafis, D.N. Bikiaris, In-situ prepared PBSu/SiO2 nanocomposites. Study of thermal degradation mechanism, Thermochim Acta, 495 (2009) 120
60. C. Paraskeva, A. Kazakopoulos, K. Chrissafis and O. Kalogirou, Study of LiMgVO4 electrical conductivity mechanism, J. Alloys Compd., 489 (2010) 714
61. A. Vassiliou, K. Chrissafis, D.N. Bikiaris, In-situ prepared PET nanocomposites: Effect of organically modified montmorillonite and fumed silica nanoparticles on PET physical properties and thermal degradation kinetics, Thermochim. Acta, 500 (2010) 21 A. Vassiliou, K. Chrissafis, D.N. Bikiaris, Τhermal degradation kinetics of poly(ethylene terephthalate)with multi-walled carbon nanotubes (PET/MWCNTs), J. Therm. Anal. Calorim., 100 (2010) 1063
62. K. Chrissafis, K.M. Paraskevopoulos, D. Bikiaris, Thermal degradation kinetics and decomposition mechanism of two new aliphatic biogredable polyesters poly(propylene glutarate) and polypropylene suberate), Thermochim. Acta, 505 (2010) 59
63. G. Vourlias, N. Pistofidis, E. Pavlidou, K. Chrissafis, Initial stages of oxidation resistance of a precipitation-hardening (PH) steel, J. Therm. Anal. Calorim., 101 (2010) 893
64. K. Chrissafis, K.M. Paraskevopoulos, A. Jannakoudakis, T. Beslikas, D. Bikiaris, Oxidized multi-walled carbon nanotubes as effective reinforcement and thermal stability agents of PLA ligaments, J. Appl. Polym. Sci., 118 (2010) 2712
65. G. Antoniadis, K.M. Paraskevopoulos, D. Bikiaris, K. Chrissafis, Non-isothermal crystallization kinetics of poly(ethylene terephthalate)fumed silica (PET/SiO2) prepared by in situ polymerization, Thermochim. Acta, 510 (2010) 103
66. K. Chrissafis, Detail kinetic analysis of the thermal decomposition of PLA with oxidized multi-wall carbon nanotubes, Thermochim. Acta, 511 (2010) 163
67. G. Papageorgiou, D.N. Bikiaris, K. Chrissafis, A different approach for the study of the crystallization kinetics in polymers. Key study: PET/SiO2 nanocomposites, Polymer International, 59 (2010) 1630
68. E. Papadopoulou, K. Chrissafis, Thermal study of phenol-formaldehyde resin modified with cashew nut shell liquid, Thermochim. Acta, 512 (2011) 105
69. I. Crigoriadou, K.M. Paraskevopoulos, K. Chrissafis, E. Pavlidou, T.G. Stamkopoulos, D. Bikiaris, Effect of different nanoparticles on HDPE UV stability, Polym. Degrad. Stab., 96 (2011) 151
70. X. Chatzistavrou, N. Kantiranis, E. Kontonasaki, K. Chrissafis, L. Papadopoulou, P. Koidis, A. Boccaccini, K. M. Paraskevopoulos, Thermal analysis and in vitro bioactivity of bioactive glass-alumina composites, Materials Characterization, 62 (2011) 118
71. P. Aslanidis, V. Gaki, K. Chrissafis, M. Lalia-Kantouri, Luminescence and thermal behavior by simultaneous TG/DTG-DTA coupled with MS of neutral copper (I) complexes with heterocyclic thiones, J. Therm. Anal. Calorim., 103 (2011) 525
72. P. Aslanidis, K. Chrissafis, M. Lalia-Kantouri, Luminescence and thermal behavior of copper (I) complexes with heterocyclic thiones. Part II: cationic complexes, J. Therm. Anal. Calorim., 103 (2011) 797
73. Stavroula G. Nanaki, K. Chrissafis, Dimitrios N. Bikiaris, Effect of molar ratio on thermal mass loss kinetics of poly(ε-caprolactone-b-propylene adipate) copolymers, Thermochim. Acta, 517 (2011) 45
74. G. Vourlias, D. Chaliampalias, T.T. Zorba, E. Pavlidou, P. Psyllaki, K.M. Paraskevopoulos, G. Stergioudis, K. Chrissafis, A compined study of the oxidation mechanism and resistance of AISI D6 steel exposed at high temperature environments, Applied Surface Sci., 257 (2011) 6687
75. G. Vourlias, D. Chaliampalias, T.T. Zorba, E. Pavlidou, P. Psyllaki, K.M. Paraskevopoulos, G. Stergioudis, K. Chrissafis, A compined study of the oxidation mechanism and resistance of AISI D6 steel exposed at high temperature environments, Applied Surface Sci., 257 (2011) 6687
76. K. Chrissafis, M. Lalia-Kantouri, P. Aslanidis, Kinetic analysis of the thermal decomposition of copper (I) complexes with heterocyclic thiones, J. Therm. Anal. Calorim., 104 (2011) 1045
77. K. Chrissafis, E. Pavlidou, K.M. Paraskevopoulos, T. Beslikas, N. Nianias, D. Bikiaris, Enhancing mechanical and thermal properties of PLLA ligaments with fumed silica nanoparticles and montmorillonite, J. Therm. Anal. Calorim., in press
78. G. Antoniadis, K.M. Paraskevopoulos, A,A, Vassiliou, G.Z. Papageorgiou, D. Bikiaris, K. Chrissafis, Nonisothermal melt-crystallization kinetics for in-situ prepared Poly(ethylene terephthalate)/monmorilonite (PET/OMMT), Thermochim. Acta, in press
79. K. Chrissafis, K.M. Paraskevopoulos, G.Z. Papageorgiou, D.N. Bikiaris, Thermal decomposition of poly(propylene sebacate) and poly(propylene azelate) biogradable polyesters: Evaluation of mechanisms using TGA, FTIR and GC/MS, J. Anal. Applied Pyrolysis, in press
