Publications
I have more than 60 papers in the following fields
- Biomedical coating
- High temperature coatings such as, Hot- dip, Pack cementation, Plasma spray coatings and Slurry method.
- Electroplating and Electroless plating of metal and its alloys.
- Composite coatings and conventional coating.
- Nano coatings
- Through hole plating of printed circuit boards.
- Powder coatings metallurgy
- Black coatings
- Biomedical coatings
1- S. Shawki, F. Hanna and Z. Abdel Hamid "Throwing Power", J. Metal Finishing, 85, No.12, (1987) 59 .
2- S. Shawki and Z. Abdel Hamid "Deposition of High Wear Resistance of Ni-Composite Coatings", J.Aircraft Engineering and Aerospace Technology, 69, No.5 (1997) 432.
3- Z. Abdel Hamid and A.M. Gad "Mechanism of Bath Stability of Electroless Deposit by Surfactants", J. Faculty of Education, No.22, (1997) 343.
4- Z. Abdel Hamid, "Surface and Thermodynamic Parameters of Some Cationic Corrosion Inhibitors", J. Anti- Corrosion Methods & Materials, 44, No.6, (1997) 389.
5- Z. Abdel Hamid, "Improving the Throwing Power of Nickel Electroplating Baths",J. Materials Chemistry and Physics, 53, No.3, (1998) 235.
6- Z. Abdel Hamid, T.Y.Soror, H.A. EI-Dahan and A.M.A. Omar, "New Cationic Surfactant as Corrosion Inhibitor for Mild Steel in Hydrochloric Acid Solution", J.Anti. -Corrosion Methods and Materials, 45, No.5, (1998) 306.
7- Z. Abdel Hamid, " Electrodeposition of Zinc-Nickel Alloys From a Chloride Bath Containing Benzyl Triethanol Ammoniun Bromide",J.Anti-Corrosion Methods and Materials, 45, No.1, (1998) 31.
8- Z. Abdel Hamid and A.M.A. Omar, "The Relation Between Anionic / Nonionic Surfactant and Electrodeposition of Ni- Polytetrafluoroethylene Polymer Composite" J. Anti- Corrosion Methods and Materials", 46, No. 3, (1999) 212.
9- Z. Abdel Hamid and R.A. El- Adly ,"Mechanism of Ni-P-A1203 Composite by Electroless Process", J. Plating and Surface Finishing, 86, No. 5, (1999) 136.
10- E.A.M. Gad, Z. Abdel Hamid, D.A. Ismail and R.A.EL Adly, " Corrosion Inhibition by N- (alkyloxycarbonylmethyl)- N-triethanol, Ammonium Chloride with Respect to the Surface and Thermodynamic Properties",J. Chemical Technology Biotechnology, 74, (1999) 345.
11- F. Hanna, Z. Abdel Hamid and A. Abdel Aal, "Direct Electroplating on Printed Circuit Boards", J. Metal Finishing, 99, No. 4, (2001) 51.
12- Z. Abdel Hamid, "Thermodynamic Parameters of Electrodeposition of Zn-Co-TiO2 Composite Coatings", J.Anti- Corrosion Methods & Materials, 48, No, 4, (2001) 235.
13- Z. Abdel Hamid and I.M.Ghayad, "Characteristics of Electrodeposition of Ni- Polyethylene Composite Coatings", J. Materials Letters, 53, (2002) 238.
14- S. F. Moustafa, Z. Abdel Hamid and A.M. AbdEl Hay, "Copper Matrix SiC and Al2O3 Particulate Composites by Powder Metallurgy Technique", J. Materials Letters, 53, (2002) 244.
15- Z. Abdel Hamid and M.T. Abou Elkhair, "Development of Electroless Nickel – Phosphorous Composite Deposits for Wear Resistance of 6061 Aluminum Alloy" J. Materials Letters, 57, (2002) 720.
16- F. Hanna, Z. Abdel Hamid And A. Abdel Aal, "Optimization of Processing Parameters in Through Hole Plating", J. of Faculty of Education, No. 22, pp (2002) G 91.
17- Z. Abdel Hamid, "Electrodeposition of Cobalt- Tungsten Alloys from Acidic Bath Containing Cationic Surfactants",J. Materials Letters, 57, (2003) 2558.
18- Z. Abdel Hamid and A.M.A.Omar," Development of Electrodeposition Nickel - Polymer Composite by the Zwitterionic Surfactant", Journal of Surfactants and Detergents, 6, No. 2, (2003) 163.
19- Z. Abdel Hamid, M. A. Abass and N. Gomaa, "Enhancement The Properties of Austenitic Stainless Steel by Nickel Diffusion Coatings", J. Anti- Corrosion Methods & Materials, 50, No. 2, (2003) 115.
20- Farid Hanna and Z. Abdel Hamid, "Electrodeposition of Biomedical Coatings on Titanium alloys Substrate ", J. Pigment and Resin Technology, 32, No. 5, (2003) 319.
21- Farid Hanna and Z. Abdel Hamid, " Electrodeposition of Biomedical Hydroxyapatite Coatings on Titanium alloys Substrate", J. Engineering & applied Science, 50, 2 (2003) 387.
22- Z. Abdel Hamid,"Mechanism of Electroless Deposition of Ni-W- P Alloys by Adding Surfactants", J. Surface and Interface analysis, 35, No. 6, (2003) 496.
23- F. Hanna, Z. Abdel Hamid and A. Abdel Aal, "Controlling Factors Affecting the Stability and Rate of Electroless Copper Plating" J. Materials Letters, 58, (2003) 104.
24- S. A. El- Badry, Z. Abdel Hamid, U. M. Rashad and A. H. Saudy, "Improvement of Stainless Steel Properties with Titanium Oxides Deposited by Pulsed Ion Implantation Using DPF", First Cairo Conference of Plasma Physics & Applications (CCPPA2003),11-15 October 2003.
25- Saher Shawki and Z. Abdel Hamid,"Effect of Aluminum Contents on the Coating Structures and Dross Formation of Hot – Dip Galvanized Processes", J. Surface and Interface analysis, 35, (2003) 943.
26- S.F. Moustafa, Z. Abdel Hamid, S.S. Abdel Rehim, W.M. Rashad
"Processing of Ni/Al intermetallic and its composites using coating route", Proc. "Powder Metallurgy World Congress & Exhibition 2004", PM 2004, Vinna, Austria, Part 4, pp 163-168, 17-21 Oct., 2004.
27- Z. Abdel Hamid, I.M.Ghayad and K. M. Ibrahim, "Electrodeposition and Characterization of Chromium- Tungsten Carbide Composite Coatings from Trivalent Chromium Bath". First International Conference on Innovative Materials and Technologies for construction and restriction", June 2004, Italy.
28- S.F. Moustafa, Z. Abdel Hamid, "Synthesis of Tungsten Carbide-Base Nanocomposite Powders by a Novel Method"4 th Japanese - Mediteranean Workshop on applied Electromagnetic Engineering for Magnetic, Superconducting and Nano Materials, Cairo 2005.
29- Z. Abdel Hamid, I.M. Ghayad and K. M. Ibrahim, "Electrodeposition and Characterization of Chromium – Tungsten Carbide Composite Coatings from Trivalent Chromium Bath" J. Surface and Interface analysis, 37,(2005) 573.
30- Z. Abdel Hamid, W. A. Ghanem and S. A. Abo El Enin, "Process Aspects of Electroless deposition for Nickel – Zinc- Phosphorous Alloys", J. Surface and Interface analysis, 37, (2005) 792.
31- A. Abdel Aal, Khaled M. Ibrahim, and Z. Abdel Hamid, "Enhancement of Wear Resistance of Ductile Cast Iron by Ni-SiC Composite Coating", Wear, 260 (2006) 1070.
32- Omayma Abdel Gawad, M. H. Abou Tabl, Z. Abdel Hamid and S. F. Mostafa, " Electroplating of Chromium and Cr-Carbide Coating for Carbon Fiber", J. surface and coating technology, 201 (2006) 1357.
33- A. Abdel Aal, Z.I. Zaki and Z. Abdel Hamid, "Novel composite coatings containing (TiC-Al2O3) powder", Materials Science and Engineering: A, 447, (2007), 87.
34- Z. Abdel Hamid, S.A. El Badry and A. Abdel Aal, "Electroless and Characterization of Ni-P-WC Composite Coating", Surf. Coat. Technol., 201 (2007) 5948.
35- O.A. Elkady, M. A. Abou Tabl, Z. Abdel Hamid and S. F. Moustafa, "Processing of Cu/Carbon Fiber Composites by Vortex and Powder Metallurgy Technique", Can. Metall. Q., 46, 4, (2007) 433.
36- Z. Abdel Hamid, S. A. El-Badry, and A. Abdel Aal, "Deposition and characterization of titanium nitride thin film" Novel Application of Surface Modification (NASM 2007) conference,17-20 September 2007, University of Southampton, UK.
37- Z. Abdel Hamid, A.Abdel Aal, "Low Phosphorous Electroless Nickel plating on carbon fibres", Novel Application of Surface Modification (NASM 2007) conference,17-20 September 2007, University of Southampton, UK.
38- Osama G. Baheig, Z. Abdel Hamid, A. Hussien, and S. F. Moustafa, "Consolidation of WC Hard Materials through Coated Powder Approach", The 7th Egyptian - Syrian Conference, (29-31 Oct. 2007) Suez , Egypt.
39- A. Abdel Aal, A. Shaaban and Z. Abdel Hamid, "Nanocrystalline soft ferromagnetic Ni–Co–P thin film on Al alloy by low temperature electroless deposition", Appl. Surf. Sci., 254 (2008) 1966.
40- A. Abdel Aal, H. Barakat, and Z. Abdel Hamid, "Synthesis and characterization of electroless deposited Co–W–P thin films as diffusion barrier layer", Surf. Coat. Technol., 202 (2008) 4591.
41- Z. Abdel Hamid, A. Abdel Aal, P. Schmuki, " Nanostructured black cobalt Coatings for solar absorber ", J. Surface and Interface analysis, 40,(2008) 1493.
42- Z. Abdel Hamid, A. Abdel Aal, "New environmentally friendly noncyanide alkaline electrolyte for copper electroplating", Surf. Coat. Technol. 203 (2009) 1360-1365.
43- Ali Shaaban, Z. Abdel Hamid, A. Abdel Aal, "Electrodepoition of Amorphous Cobalt Alloy as Barrier Layer for Microelectronics", 1st International Joint Conference on Material Science, Nanotechnology and Biotechnology – MNB 09- Future Challenges, National Research Centre, 4-6 Jan 2009.
44- Z. Abdel Hamid, A. Abdel Aal, S.S. Abdel-Rehim, M. A. Hassan,
"Preparation and characterization of Ni–P coating and its composite using electrodeposition technique"10 international on chemistry and its role in development, Department of chemistry, Faculty of science, University of Mansoura, 16-21- march 2009.
45- Z. Abdel Hamid, A. Abdel Aal, Ali Shaaban, H.B. Hassan "Electrodeposition of CoMoP thin film as diffusion barrier layer for ULSI applications", Surf. Coat. Technol., 203 (2009) 3692-3700.
46- Z. Abdel Hamid, "Electrodeposition of black chromium from environmentally electrolyte based on trivalent chromium salt", Surf. Coat. Technol. 203 (2009) 3442–3449.
47- Z. Abdel Hamid, S. El-Sheikh, and S. El Badry " Electrodeposited nickel composite coating containing nano-particulates Cr2O3 by conventional electroplating technique"
EUROCORR 2009, THE EUROPEAN CORROSION CONGRESS, "Corrosion from the Nanoscale to the Plant" European Federation of Corrosion, Event No. 310, 6 - 10 September 2009 Nice Acropolis.
48- Z. Abdel Hamid, A. Abdel Aal, Ali Shaaban & S. Barakate, "Development of hot-dip zinc coating process using under layers", EUROCORR 2009, THE EUROPEAN CORROSION CONGRESS, "Corrosion from the Nanoscale to the Plant" European Federation of Corrosion, Event No. 310, 6 – 10 September 2009 Nice Acropolis.
49- Z. Abdel Hamid, A. Abdel Aal, & Ali Shaaban "Evaluation of electrodeposited CoMoP thin film as diffusion barriers layer for ULSI applications", EUROCORR 2009, THE EUROPEAN CORROSION CONGRESS, "Corrosion from the Nanoscale to the Plant" European Federation of Corrosion, Event No. 310, 6 – 10 September 2009 Nice Acropolis.
50- Ahmed Ibrahim, Z. Abdel Hamid, A. Abdel Aal, "Investigation of nanostructured and conventional alumina–titania coatings prepared by air plasma spray process", Materials Science & Engineering A, 527(2010), 663-668.
51- Z. Abdel Hamid, A. Abdel Aal, "Effect of electroless process parameters for nickel–phosphorous coating on carbon fibers", Anti-Corrosion Methods and Materials, 57/4 (2010) 173-179 .
52- Z. Abdel Hamid, A. Abdel Aal, H.B. Hassan, A. Shaaban, "Process and Performance of Hot Dip Zinc Coatings Containing ZnO and Ni-P Under Layers as Barrier Protection", Applied Surface Science, 256, Issue 13, 15 (2010) 4166-4170.
53. Z. Abdel Hamid, A H.B. Hassan, A.M. Attyia, “Influence of Deposition Temperature and Heat Treatment on the Performance of Electroless Ni-B Films” Surf. Coat. Technol., 205 (2010) 2348–2354.
54. W. Li, W. M. Daoush, A. Bothate, Z. Abdel-Hamid, R. Yamanoglu, E. A. Olevsky, S. Moustafa, and R. M. German, “Influence of Powder Preparation on Consolidation Behavior and Properties of Tungsten-Copper Alloys,” Advances in Powder Metallurgy and Particulate Materials – 2010, Metal Powder Industries Federation, Princeton, NJ, 2010, Part 2, pp. 45-57.
55. S.F. Moustafa, Z. Abdel-Hamid, Osama G. Baheig and A. Hussien, “Synthesis of WC hard materials using coated powders”, Advanced Powder Technology, In Press, corrected Proof, Available online 9 September 2010.
56. H. B. Hassan, Z. Abdel Hamid, ”Electroless Ni-B supported carbon for direct alcohol fuel cell applications”, International Journal of Hydrogen energy, 36, Issue 1, January 2011, Pages 849-856.
57. S.F.Moustafa, Z.Abdel Hamid, Fatma A. Morsy, N. A. Khalifa and F.Abdel Mouez, “Fabrication of copper/diamond composites for heat sink application using powder metallurgy technique”, International conference on material imperatives in the new millennium (MINM 2010) - 29.11.2010 - 02.12.2010- Cairo, Egypt.
58. H. B. Hassan, Z. Abdel Hamid, “Electrooxidation of ethanol at carbon supported Ni-Cr2O3 nanocomposite anodes for fuel cell applications”, International Journal of Hydrogen energy, 3 6 ( 2 0 1 1 ) 8 4 9 -8 5 6.
59. Z. Abdel Hamid, M.T. Abou El-khair, and H. B. Hassan, “Synthesis and protection of AM50 magnesium alloy and its composite using environmentally pretreatment electrolyte”, submitted to (2011).
60. Wei Li, Randall M. German, Aditya Bothate, Walid M. Daoush, Eugene A. Olevsky, Z. Abdel-Hamid, Sayed Moustafa, “Barriers of W-Cu Alloy Consolidation by Spark Plasma Sintering”, PowderMet 2011 May 18-21 2011 MPIF /APMI SAN FRANCISCO
